Road Stud glue

Road Stud glue
Component A: Epoxy Adhesive
Component B: Modification of organic amine, quartz powder

Product characteristics: 
For bonding plastic road studs to concrete or asphalt. It is twocomponent, solvent free and 
High strength epoxy system. The mixing ratio is 1: 1. 
Bonding strength, high curing time 
Water resistance, freeze-thaw resistance, alkali resistance,ageing, fire 
After curing drug-free 
But with a variety of material cementation 
Half flow type 
Professional adhesive road junction and reflective logo spike spikeslowdown 

Physical and chemical properties 
Form: 2-comp. 
Color: A: White or grey B: Black Odor: Oil ester sapor 
Density: [g/cm3](° C): 1.65-1.85(25) 
Viscosity [Pa. S] (° C): 80(25) 
Solubility in water (g/l)(° C): Component A, B: Allinsoluble 
pH-value(g/l, H2O, ° C): Component B: 6(pure) 
Note: 
Be in strict accordance with the weight ratio is thoroughly mix thegrey after construction 
There is water in the wet places 
Not less than 5 degrees Celsius temperature 
After three hours of construction shall wash with water orleaching 
Winter temperatures when, had better be heated to gel (30-40 °C 
When not completely cured adhesive things not moving 
Excess plastic cannot fall back to the original packagingbarrel.

Road Stud glue

Road Stud glue